Niagara Falls Suspension Bridge

Template:Infobox Bridge The Niagara Falls Suspension Bridge was the world's first working railway suspension bridge. It spanned 825 feet (251 m) and stood 2.5 miles (4.0 km) downstream of Niagara Falls from 1855 to 1897. Connecting Niagara Falls, Ontario to Niagara Falls, New York (the two cities assimilated the towns at the ends of the bridge by 1892), the bridge carried mixed traffic on its two decks across the Niagara River; trains crossed over the river by way of the bridge's upper deck while pedestrians and carriages used the lower. As the bridge was the result of a collaboration of two companies from two countries, it was also known by its American name, the International Suspension Bridge. The bridge had other names including the Niagara Railway Suspension Bridge and Niagara Suspension Bridge, but the most common and definitive was simply the Suspension Bridge.

The Suspension Bridge was part of Canadian politician William Hamilton Merritt's vision to promote trade within his country and with its neighbor the United States. When Merritt and company invited the engineering community to bid for the bridge project, they encountered heavy criticism. Many bridge builders, and the general public, did not believe a suspension bridge could allow the safe passage of trains. Nonetheless, the bridge companies engaged several well-known civil engineers to build and maintain the bridge. Charles Ellet, Jr. was first hired to construct the bridge. Using a line laid by a kite across the 800-foot (240 m) chasm, he built a suspension footbridge in 1848 as the first part of his plan. Not long after, Ellet left the project after a bitter financial dispute with the bridge companies. A three-year hiatus followed before the companies hired John Augustus Roebling to complete the project. Roebling used the footbridge as scaffolding to build the double-decked bridge. By 1854 his bridge was nearly complete, and the lower deck was opened for pedestrian and carriage travel. On March 18, 1855, a fully-laden passenger train drove across the upper deck at 5 miles per hour (8.0 km/h), and officially opened the completed bridge.

As a border crossing between Canada and the United States, the Suspension Bridge played significant roles in the histories of the Niagara region and the two countries. Three railway lines crossed over the bridge, connecting cities on both sides of the border. The Great Western Railway, New York Central Railroad, and New York and Erie Rail Road differed in the width of their tracks; the bridge used a triple gauge system to conserve space, overlapping two tracks on top of each other and using a rail of each to form the third track. The railroads brought a large influx of trade and tourists into the region around the Niagara Falls. Growing quickly from the traffic, the small towns at the ends of the bridge were integrated into the Niagara Falls cities. Many tourists flocked to the bridge to view the acclaimed marvel of engineering, as well as tightrope-walking daredevils who performed against the backdrop of the falls. In the time leading to the American Civil War, the Underground Railroad helped slaves in the United States escape across the Suspension Bridge to freedom in Canada. After the war, the bridge became a symbol of inspiration to Americans, encouraging them to rebuild their country and pushing them to quickly industrialize their nation.

Throughout its years of service, the Suspension Bridge stood strong and allowed thousands of passengers and trains to pass over it safely. Its success proved that contrary to general opinion a safe and operational railway suspension bridge was tenable, and allayed concerns induced by the 1854 collapse of the Wheeling Suspension Bridge. Slowly decaying, the bridge's wooden structures were replaced with steel and iron versions by 1886, and the renovated bridge was stronger, capable of bearing a heavier load. By the end of the 19th century, the weight of trains had increased greatly and far exceeded the maximum capacity of the bridge. The Suspension Bridge was finally replaced by the Steel Arch Bridge, which was later renamed the Whirlpool Rapids Bridge, on August 27, 1897. When the Suspension Bridge was dismantled, its wire cables were found not to have noticeably degraded, a testament to its strength and design.

Conception and building

In the middle of the 19th century, the hinterlands of the North American East Coast were opened up rapidly; colonists moved further inland, pushing back the wilderness and establishing settlements that grew into towns and cities. The growth of these centers of civilization was fueled by the increasing number of routes set up to facilitate trade among the settlements. Canadian entrepreneur and politician William Hamilton Merritt was a major contributor to the establishment of several trade routes in his country. His primary focus was on the lakes and the dredging of waterways to open up trade between the lake cities. He also showed interest in railroads, envisioning a network that connected cities on both sides of the United States–Canadian border from the Atlantic coast in the East to the new territories in the West. Merritt's dream would lead to the creation of a man-made structure, a railway suspension bridge, that spanned the Niagara River alongside the river's acclaimed natural feature, the Niagara Falls.

William Hamilton Merritt was the chief proponent for the Suspension Bridge, persevering to obtain charters for the bridge.

Merritt's vision for the Niagara Suspension Bridge was conceived at the Niagara River itself.Template:Ref label In the summer of 1844 while taking a picnic on the river shores, near what was then the town of Clifton, Merritt read a letter from his sons to his wife. The younger Merritts were touring Europe and visited the town of Fribourg, Switzerland. Amazed by the Freiburg Suspension Bridge, they wrote to their parents, describing the wonders of the bridge in eloquent terms. Their writing had a profound effect on their parents, and the elder Merritts wondered if such a suspension bridge could be built across the Niagara. Merritt was driven to realize that vision, and he approached the relevant authorities, including the Queen of England, for permission to start the construction of the suspension bridge. His efforts were rewarded in 1846; the state of New York and the government of Canada approved the charters to form the Niagara Falls International Bridge Company and the Niagara Falls Suspension Bridge Company, respectively.

In the years before the first bridge was built over the Niagara River, the river was crossed entirely by boats. Powered by steam engines, vessels ferried people and carriages across the raging river at calmer points of the water. One of these vessels was the Maid of the Mist, the first tourist boat to ply the waters of the Niagara River. Named after a local legend, the steamer began service in 1846. Launching from a point 2 miles (3.2 km) below the Horseshoe Falls, it chugged up to the base of the falls, offering a close-up view of the natural wonder to its passengers, before moving to the opposite shore. The site for the Suspension Bridge was half a mile (0.8 km) from the Maid of the Mist's landings. The selection of the bridge site was based more on aesthetics than technical ease; it was the narrowest point of the gorge—800 feet (240 m) across and 230 feet (70 m) deep—that allowed a full view of the falls from the American side.Template:Ref label

After the bridge companies were founded, they invited engineers to submit plans and cost estimates for a suspension bridge that carried a railway. The invitation was met with skepticism among the engineering community. At that time, there was not a suspension bridge that could allow a train to pass over it safely. While the Europeans were erecting suspension bridges by the hundreds, the Americans mostly ignored them out of safety concerns; in 1831 Sir Samuel Brown's Broughton Suspension Bridge in Britain had collapsed under the marching feet of a troop of soldiers, sending those on its deck into the River Irwell. Furthermore, many American bridges had collapsed without experiencing weight and pressure equivalent to railroad traffic, and American engineers feared that any railway bridge would likely fail—especially a suspension bridge.

Four engineers responded: Edward Serrell, Samuel Keefer, Charles Ellet, Jr., and John Augustus Roebling. All submitted designs for a suspension bridge. At the time of the bidding, Ellet and Roebling were acknowledged as masters of suspension bridge building in America. Roebling submitted two designs, a conservative single-deck suspension bridge and a double-decked version, both with meticulous calculations and drawings. Instead of relying solely on submissions, Charles Ellet, Jr. took a proactive approach. When he got wind of the project in 1845, he wrote to Charles B. Stuart, chief engineer of the Great Western Railway,Template:Ref label boldly proclaiming that he could build a bridge for any likely purpose across the Niagara. After the charters had been obtained, Ellet helped Stuart to sell the bridge companies' stock and offered to buy US$30,000Template:Ref label worth of stock himself. His efforts earned him the $190,000 bridge contract on November 9, 1847.

Charles Ellet, Jr.'s suspension footbridge

Main article: Charles Ellet, Jr.

Charles Ellet, Jr., the first American-born civil engineer formally educated in Europe, campaigned for suspension bridges in United States.

While growing up on a farm in Pennsylvania, Charles Ellet, Jr. scraped through odd jobs, but saved enough money to finance an education at the École Polytechnique in France. After graduation, he toured Europe before returning to the United States as the only native American with a formal education in engineering. Ellet announced his ambitions to build suspension bridges in his country of birth by proposing to span the Potomac River with one. His proposal was ignored; few were willing to heed a young, inexperienced and impetuous engineer. To gain experience, Ellet started to work on railroads and canals, and later became the chief engineer on the James River and Kanawha Canal project. He further improved his reputation by contributing articles about suspension bridges to respected engineering journals, such as American Railroad Journal; eventually, Ellet built his first suspension bridge over the Schuylkill River, Pennsylvania, in 1842.

Ellet had the looks of an actor, which were complemented by his entertaining oratorical skills. He took advantage of these characteristics, and used showmanship and dramatics to market his proposals. These skills helped to win him attention and raise his profile both in the public and within the industry. However, his imperiousness also ruffled the feathers of people, which caused conflicts. Nonetheless, his capability to promote himself had won him the contracts for the Suspension Bridge and the later Wheeling Suspension Bridge; the Wheeling contract was won in July 1847 while Ellet's plan for the Niagara Suspension Bridge was still in its initial stages of construction. Ellet's initial design for the bridge at Niagara placed all forms of transportation on a single deck. The railway track was in the middle of the deck, sandwiched between carriageways and footpaths on the outer sides. Moreover, trains would not go over the bridge; their cars would be disconnected from the heavy locomotives and pulled across the bridge by horses, cables, or lighter 6-short-ton (5.4 t) engines. Before the work could begin, Ellet faced the problem of all suspension bridge construction: getting a line across the gap.

Ellet's brainstorming sessions with his men raised several ideas that could enable a line to be suspended across the gorge; these included firing cannon balls with the line attached, towing it across the river with a steamer, and tying it to a rocket that would then be launched across the gorge. Ultimately the bridge engineer chose an idea inspired by Benjamin Franklin's experiment with a kite. It was similar to 15th century inventor Leonardo da Vinci's plan to span a gap. Ellet also took the opportunity to generate publicity for his project. Organizing a kite-flying contest, he offered $5Template:Ref label to any boy who flew a kite across the gorge and secured the kite string to the other side. Youths from nearby towns flocked in to participate. Unlike the other boys who flew their kites from the United States side of the gorge, 15-year-old Homan WalshTemplate:Ref label crossed the river by a ferry upstream and walked to the Canadian side of the bridge site. He almost succeeded on his first attempt; his kite flew across but crashed just short of the shore. After resting several days at a friend's house, Walsh finally got his kite across the gorge and secured its line to a tree.

Charles Ellet and his team tied a heavier line to the kite string and pulled the joined lines across. They pulled successive heavier and stronger lines across until the final bridge cable—⁷⁄₈ inch (2.2 cm) thick—was hanging across the gorge. The cable was suspended between two wooden towers 40 feet (12 m) feet tall, and it was attached to an iron basket. Ellet planned to use this system as a basket ferry to shuttle workers and materials across the gorge, saving time that would otherwise have been spent on land and ferry travel. Through media coverage and word-of-mouth, many people knew of Ellet's efforts and flocked to the site to watch the construction. On March 13, 1848, the system was completed, and the team planned to test it by pulling the empty basket across. They hit a snag when the basket kept getting stuck halfway and could not move ahead. Pulling back the basket, Ellet decided to assure the watching crowd that the system was workable. He stepped into the basket, and it moved towards the opposite shore. When Ellet reached the problematic spot, he spotted the issue; the basket's rollers could not pass over a portion of the cable that had been accidentally flattened during the construction. He fixed the problem and proceeded to cross to the Canadian side and back, becoming the first person to cross the gorge. Although the bridge companies had prohibited Ellet from collecting tolls, he charged each person $1.00Template:Ref label for the chance to "observe first hand the engineering wonder of bridging the Niagara". On certain days, the basket ferry conveyed up to 125 people across the gorge.

Continuing his construction, Ellet built an 8-foot (2.4 m) wide footbridge out of the towers and cable of the basket ferry. The bridge builder inaugurated the footbridge in his typical manner on July 29, 1848; standing in his horse-buggy like a gladiator in his chariot, Ellet sped across the bridge, which had railings for only a third of its length at that time. His stunt garnered further publicity for the bridge, and the toll collected from the span proved lucrative; $5,000 was collected in less than a year since its official opening on August 1, 1848. Disputes arose between the bridge companies and Ellet over their shares of the money, and their relations turned bitter. The companies charged that Ellet was late in his schedule and withheld payment. Ellet retaliated by mounting cannons at the footbridge to claim ownership over it. In the end the matter went to court. The bridge companies paid $10,000 to Charles Ellet, and he left the project to work full-time on the Wheeling Suspension Bridge.

The Niagara Suspension Bridge project was in hiatus for three years before the bridge companies engaged another renowned civil engineer, John Augustus Roebling, to complete it. The delay caused Roebling to miss out on the honor of building the first permanent bridge to span the Niagara; Serrell completed the Lewiston Suspension bridge in 1851. Roebling would, however, achieve other honors in building his Niagara Railway Suspension Bridge.

John Augustus Roebling's railway suspension bridge

Main article: John A. Roebling

Born in Germany, John Augustus Roebling graduated from the Berlin Bauakademie in 1826, receiving a diploma in engineering from the Royal Polytechnical Institute. He initially worked for the German government but resigned after tiring of the bureaucracy. He left for the United States in 1830 and arrived with his brother in Philadelphia on August 6, 1831. Instead of continuing an engineering profession, he initially took up farming for a living. After five years he married a tailor's daughter, and had eight children with her over the next decade. Agrarian work was unsatisfactory to John Roebling, and in 1837, after the death of his brother and the birth of his first child, he returned to engineering.

John Augustus Roebling built several prominent suspension bridges in the United States, earning him the esteem of the engineering community.

Roebling first signed on as a surveyor for the Sandy and Beaver Canal, launching his career with a string of canal and railroad projects. Aside from writing articles in engineering journals, Roebling designed his own wire cables and started his own company to manufacture them; the John A. Roebling Company was the first wire rope manufacturer in the United States. Gradually gaining fame for his civil engineering, Roebling finally got to build suspension bridges. His first bridge was the Allegheny Suspension Aqueduct in Pittsburgh. The structure, completed in 1845, was the first suspension aqueduct in the world and the first large American suspension bridge that had multiple spans. Furthermore, it was the first suspension structure built with modern cable spinning techniques—Roebling's own invention. Earlier bridge building techniques involved fabricating the main cables at a factory, transporting them to the bridge site, and then stretching the heavy cables over the gap to erect them over the bridge. Roebling, during his experiments with wire ropes, conceived and patented a new construction method for these main cables. Individual wires were run around pulleys attached to a guide line that spanned the gap. The guide looped around a horizontal wheel on each side of the gorge. Like a belt in a mechanical system, the guide and pulleys moved as the wheels turned, pulling the wires along. As the wires were drawn across the gap, they were spun into thicker strands, which were subsequently spun into the main cables. The cables supported themselves and the proportional weight of the bridge as they were formed. The method became the standard for suspension bridge construction, and remained unchanged for many years. In the 20th century, suspension bridges were still built with this pulley winding system, albeit with more sophisticated equipment.

John Roebling was a contrasting character to Charles Ellet. Whereas Ellet embellished his proposals with fanciful words and deeds, Roebling presented papers filled with meticulous calculations and drawings. The elder engineer was stern and driven to achieve, taking a scientific approach to all interests. Rarely did he show emotions in his dealings, even to his closest associates. The man, however, dared to confront his detractors and make bold exaltations about his work. He openly called European suspension bridges—including American suspension bridges built with European techniques—weak, and occasionally sniped at Ellet's and Stephenson's works. He announced that his Brooklyn Bridge, when completed, "will not only be the greatest bridge in existence, but it will be the greatest engineering work of this continent, and of the age." Roebling's history with Ellet started before the bidding for the Niagara Suspension Bridge, early in their careers. During the bidding for the Schuylkill Suspension Bridge project, Ellet had written a proposal that was published in the American Railroad Journal. Mistakenly believing Ellet had won the contract, Roebling wrote to offer his congratulations and requested to be Ellet's assistant. He received a formal reply without any reference to his request, and his subsequent letter was ignored. When Roebling learned that a contractor had won the bid, he successfully applied to be the contractor's chief engineer. Ellet, however, persisted with his tactics and snatched the project away from the contractor; he promoted himself to the bridge company and offered to accept land instead of cash as payment. From then on, Ellet and Roebling became rivals, vying with each other for suspension bridge projects in North America. Roebling learned from their rivalry. His losses to Ellet showed him that he needed to promote himself and gain backers to effectively secure the contracts he desired.

When Roebling was called to the Niagara Suspension Bridge project in 1851, he had six suspension structures to his name. He found Ellet's final plan to be impractical; the bridge would have been too heavy and expensive. Roebling had another design in mind: the double-deck bridge he had proposed earlier during the bidding.Template:Ref label The lower deck, level with the edge of the chasm, would convey passengers and carriages, and the upper deck, 18 feet (5.5 m) above, would allow fully-laden trains to continue their journeys non-stop, albeit at a speed of 5 miles per hour (8.0 km/h). Roebling reasoned that the decks and sufficient trusses would form a rigid tube, making the bridge stiffer than a normal suspension bridge. The theory was similar to that of the tubular bridge but implemented at a lower cost. The engineering community was critical of Roebling's project. Robert Stephenson, builder of the tubular Britannia Bridge, was among those short-listed to complete the Niagara Suspension Bridge before Roebling's selection. Stephenson had submitted a design for a tubular bridge, and in 1859 he built a large and expensive tubular bridge for the Grand Trunk Railway at Montreal, Quebec. The bridge builder then said in derision of Roebling's suspension railway, "If your bridge succeeds, mine is a magnificent blunder."

In the face of criticism, Roebling completed the project in four years, using Ellet's footbridge as scaffolding. The railway deck was stress-tested by the crossing of the 23-short-ton (21 t) steam engine London at a speed of 8 miles per hour (13 km/h) on March 8, 1855. Ten days later the upper deck of the bridge was officially opened; the lower deck had been opened to the public a year earlier. As the first commercial passenger train trundled over the bridge, the two countries were finally connected by railroad across the Niagara River. The successful crossings of these and later trains made Roebling's Suspension Bridge the first working suspension railway bridge in history.Template:Ref label

Engineering

Roebling's bridge was supported by two limestone towers on each side of the gorge. These Egyptian-style towers stood 88 feet (27 m) tall on the American shore and 78 feet (24 m) tall on the Canadian shore. With their foundations 28 feet (8.5 m) in the earth, the limestone structures could support up to 12 million pounds (5.4 million kg) of pressure. Four 10.5-inch (27 cm) thick main cables held up the bridge; two cables ran through iron saddles at the top of each tower. Each cable comprised 3,059 wires that were spun with Roebling's patented technique used in his Allegheny Suspension Aqueduct. The ends of each cable were secured to 6-square-foot (0.56 m²) cast-iron plates sunk 20–30 feet (6.1–9.1 m) deep in the bedrock. Support lines hung down from iron clamps that encircled the main cables, and held up the decks. Deep trusses—never before seen on a large suspension bridgeTemplate:Ref label—lined the sides of the bridge, and joined the two decks so that the structure looked like a cage. The trussed sides and the upper and lower decks, which spanned 825 feet (251 m),Template:Ref label formed a "hollow straight beam", reinforcing the rigidity of the bridge.

The Suspension Bridge was further stiffened by guy-wires which ran from its upper deck to the top of its towers. Criticism of suspension bridges was growing after the Wheeling Suspension Bridge collapsed under strong winds in 1854. To address these concerns, Roebling added more guy-wires to secure the lower deck to the shores below. Roebling's efforts ensured that his Suspension Bridge remained standing while other suspension bridges across the Niagara River collapsed because of strong winds.Template:Ref label Although he was not the first engineer to appreciate the need for a suspension bridge to be sufficiently rigid or to implement the methods to do so, Roebling was the first to understand the principles behind the methods and combine them in the building of a suspension bridge. Roebling proved that despite popular opinion, properly built suspension bridges can safely support the passage of heavy railway traffic. The engineer's combination of stiffening methods created the first modern suspension bridge. Such was the rigidity of the Suspension Bridge that it withstood the shockwave caused by the nearby fall of a 5,000-short-ton (4,500 t) mass of rock in 1863; the force of the impact manifested itself as a wave, rippling through the decks of the bridge from the American side to the Canadian side and back.

The Suspension Bridge used combinations of four rails to serve three different railroads.

From the United States, the New York and Erie Rail Road's Canandaigua and Niagara Falls Railroad and New York Central Railroad's Buffalo and Niagara Falls Railroad crossed over the bridge and reached into Ontario. Similarly, the Great Western Railway in Canada extended its network from Canada into New York. At the time of the bridge's opening, the three railroads were of different gauges: Template:RailGauge on the New York Central, Template:RailGauge on the Great Western, and Template:RailGauge on the Erie. Instead of accommodating three railways side-by-side on a single wide deck, the bridge saved space by overlapping the tracks over each other. This method used only four rails; one pair formed the track for one railway, and the other pair formed another. One rail from each pair would then form the final track. In the first year of the bridge's operation, an average of 30 trains trundled across it each day. Five years later, 45 trains passed over the structure daily.

Roebling mandated that the trains be limited to a maximum speed of 5 miles per hour (8.0 km/h) to ensure absolute safety. He was confident the bridge could handle faster train traffic, but he preferred a safe operation. In his tests the bridge supported a 326-short-ton (296 t) train, bending 10.5 inches (27 cm) under the weight. This was within the maximum load of 450 short tons (410 t) specified in the design of the bridge.Template:Ref label The figure was a conservative estimate. The cables and guy-wires could support 7,300 short tons (6,600 t), and travel journalist Alfred J. Pairpoint commented that it was normal to see 1,200-short-ton (1,100 t) trains pass over the bridge without danger. The bridge shook whenever a train trundled over it, although this had no effect on its integrity. When the frequency of passing trains was high, the trembling was noticeable to travelers on the lower deck and proved uncomfortable to some; writer Mark Twain noted, "You drive over to Suspension Bridge and divide your misery between the chances of smashing down two hundred feet into the river below, and the chances of having a railway-train overhead smashing down onto you. Either possibility is discomforting taken by itself, but, mixed together, they amount in the aggregate to positive unhappiness." Despite such commentaries, thousands of people crossed over the bridge safely every day.

View of the bridge's lower deck entrance, with a toll booth at left; deep trusses that helped reinforce the bridge's rigidity are visible

American engineers regard the Suspension Bridge as a major achievement of efficiency. In a fledgling country where resources—material and financial—were limited, they had to make do with whatever was available. This goal was espoused by the American Society of Civil Engineers, which opined, "That is the best engineering, not which makes the most splendid, or even the most perfect work, but that which makes a work that answers the purpose well, at the least cost." Roebling had built a bridge that rivaled grander bridges of leading European nations at a much lower cost. His Suspension Bridge used only one-sixth the material of Stephenson's Brittania Bridge, but was twice as long and had a capacity that exceeded the tubular bridge. Moreover, the expenditure on Roebling's Suspension Bridge was $400,000, whereas a tubular bridge of equivalent length and load-bearing capability would have cost $4 million. Roebling's success established him as the master of suspension bridges. The inclined guy-wires that stretched from the top of towers to the roadway of the Suspension Bridge became the signature of his future works.

Although the Suspension Bridge proved that the suspension system could be safely used to carry railroads, no more suspension railway bridges were built. The outbreak of the American Civil War diverted attention from such civil engineering ventures, and by the time attention was paid to building bridges again, cantilever bridges were in vogue for railway bridges. Regardless, the Suspension Bridge's success made it a model for suspension railway bridges. When the city of Quebec called for a structure to span the St. Lawrence River in 1850, it looked to the Suspension Bridge for inspiration. Seventeen years later, the British journal Engineering called for a suspension railway to bridge the Straits of Messina and also referred to Roebling's bridge. Lastly, Stuart opened his 1871 work on the history of American engineering, Lives and Works of Civil and Military Engineering in America, with an illustration of the bridge.

Legacy

As a border crossing between two large growing countries, the Suspension Bridge had throngs of travelers passing over it. Furthermore, it was the intersection of three major railroads. Coupled with its vicinity to a natural wonder, the Niagara Falls, the bridge brought a lot of railroad traffic into the region once it was opened. The towns at the ends of the bridge benefited greatly from this heavy movement of people and goods. The village of Suspension Bridge, United States, grew quickly within a few years after the opening of the bridge, acquiring shops, factories, and a hotel. Its tourism and commerce soon rivaled the town of Niagara Falls, New York; eventually, the village was merged into the town in 1892. Similarly, Clifton on the Canadian end of the bridge was integrated into the town of Niagara Falls, Ontario. The two Niagara Falls cities boasted commerce that surpassed neighboring settlements. Around the time of its official opening, the bridge was one of the busiest points of trade on the United States–Canadian border, carrying $12 million of transitory goods and $2 million of bonded materials into Canada. To handle the large amount of goods exchanged over the border, the Lewiston customs house—the primary customs for the Niagara region—was relocated to the Niagara Suspension Bridge in 1863.Template:Ref label

Advertisement for Great Western Railway travel via the Niagara Falls Suspension Bridge, c. 1876

The bridge's depiction as an engineering marvel and beautiful sight lured many visitors to the Falls. Travelers could, while crossing the bridge, enjoy a view of the Falls enhanced by the sensation of standing 250 feet (76 m) in the air. The Falls, however, proved distant and indistinct to some when there was overcast weather. On the whole, the Suspension Bridge was considered as an attraction that must be seen by visitors to Niagara Falls. In paintings and prints of the bridge, the Suspension Bridge became the focus, pushing the Falls into the background. Unlike paintings of the Falls that capture the viewer's eye with their majestic views of the natural wonder, pictures of the bridge impressed viewers with the utilitarian design of the structure. By 1897, the inbound trains to Niagara Falls brought 276,900 visitors during the months of May to August. A streetcar system was established in 1882 to handle the increasing cross-border pedestrian traffic. Initially pulled by horses, the trolleys were converted to run on electricity in 1892. The Suspension Bridge was the pride and symbol of the Great Western Railway, which touted it as the "only way route via Niagara Falls & Suspension Bridge".Template:Ref label

Daredevils such as Maria Spelterini, the only woman to cross the Niagara gorge on a tightrope, performed their stunts to crowds on the shore and the Suspension Bridge.

Travelers on the Suspension Bridge witnessed several death-defying stunts performed across the Niagara Gorge. On June 30, 1859, they saw Charles Blondin's feat of becoming the first man to cross the chasm on a tightrope. In mid-crossing Blondin sat down on the rope and lowered a line to retrieve a drink from the deck of the Maid of the Mist below. In his later tightrope acts at the same spot, the acrobat would perform a different stunt on each occasion. One time he cooked and ate an omelette in mid-crossing; another time he carried his manager Harry Colcord on his back. While giving Colcord a piggyback ride, Blondin stopped five times on the tightrope to rest and recover his strength; each time Colcord gingerly got off Blondin's back and stood on the tightrope, climbing back on after the acrobat had enough rest. Blondin's success inspired other acrobats, such as William Leonard Hunt ("The Great Farini"), Samuel Dixon, Clifford Calverly, and Signorina Maria Spelterini, to emulate and try to surpass his acts at the same spot. The Signorina, the only woman to walk across the Niagara on a tightrope, once crossed while blindfolded and another time with her hands and legs in manacles.

Another group of people in America had their own risky crossings over the Niagara Gorge as they fled over the border into Canada. They were enslaved African-Americans who sought freedom by escaping to a country that declared the liberation of any slave who entered it. The bridge was part of the Underground Railroad, a network of routes designed to smuggle slaves in the United States to freedom in Canada. Before the American Civil War, fleeing slaves had only four main routes into Canada, of which one was crossing the Niagara River. Slaves who escaped along the Niagara route had help from several quarters. The state of New York generally favored granting freedom to slaves; this attitude emboldened African-American workers in Niagara, who frequently helped slaves flee to Canada. Before the Suspension Bridge was completed, fugitives either crossed the raging river on a boat or risked their lives by swimming at calmer points of the river. The Suspension Bridge made escape across the river easier and safer, although there was still risk. To avoid getting caught and sent back to their owners, slaves had to sneak across on foot or hide aboard trains and oxcarts. Antislavery activist Harriet Tubman guided fugitives at night and bribed custom officials to turn a blind eye. As a result, many slaves crossed the Suspension Bridge to freedom before the United States was engulfed in civil war.

When the war ended and the United States turned its focus toward rebuilding, Roebling started building his Brooklyn Bridge. As the monumental task could affect naval navigation, it required state approval, and the government wanted a thorough review of the engineer's credentials; hence, a Bridge Party was organized. Comprising Roebling and his son, as well as their fellow bridge engineers, generals, businessmen, and high society figures, the party toured the country to review four bridges Roebling had built before the civil war. The final item on their itinerary was Roebling's Niagara Suspension Bridge. At the dinner to commemorate the end of the bridge tour, civil war veteran General Henry Warner Slocum gave a toast and called the Suspension Bridge a symbol of inspiration for the United States in its rebuilding efforts. This sentiment was shared by the guests and was expressed at later dinners across the United States. The achievement of building a large suspension bridge over a gorge in the face of overwhelming adversity—constant put-downs by the professional community, American and European—gave the United States a sense of pride. Nationalism rose as the country lauded the bridge. The completion of the bridge that had been deemed impossible by the Western world gave Americans, who had lesser technical accomplishments than Europe at that time, a trophy that stood above any other. The Suspension Bridge became the American symbol to brave the toughest of challenges and do the impossible, pushing their drive for industrialization even harder. Charles W. Woodman specifically drew attention to the Suspension Bridge in his 1865 address to the United States Senate for approval to build a rail system to transport a ship out of the water and up around the Niagara Falls.

Maintenance and replacement

The Suspension Bridge in 1886, after its wooden components had been replaced with steel

Budget concerns forced Roebling to build the Suspension Bridge primarily with wood; the cost of casting the components out of iron and transporting them "[way] out West" was exorbitant. The organic material decayed and rotted because of the moisture present around Niagara Falls. As the industrialization of the United States moved forward rapidly, the introduction of the Bessemer process greatly lowered the cost of the more durable steel and iron. By 1880, the Suspension Bridge's wooden trusses, beams, and flooring were replaced with steel. The wire cables were not replaced; their cores were still in pristine condition. The outer layer of wires in the cables was, however, lightly corroded and had to be replaced. Due to severe deterioration, the limestone towers were replaced in 1886 with steel framed versions. These renovations increased the bridge's strength and helped it handle heavier loads for a few more years.

The weight of trains in North America had greatly increased by the mid-1890s. Larger and more powerful locomotives were required to pull cars that handled an increasing number of passengers and goods; compared to the 23-short-ton (21 t) locomotives crossing the bridge in the 1850s, 170-short-ton (150 t) locomotives were the common engines 40 years later. The weight of these trains exceeded the specifications of the Suspension Bridge, and the bridge companies took the opportunity to review and request the replacement of the bridge. Civil engineer Leffert L. Buck, who had been hired to maintain the Suspension Bridge, was selected to design the replacement bridge. He settled for a bridge of the arch design. At that time, arch bridges were the new models for railway bridges and were more cost-efficient than suspension bridges. Buck built the new bridge around and below the Suspension Bridge, replacing it a piece at a time. His plan allowed bridge traffic—train and pedestrian—to continue without disruption. By August 27, 1897, the last pieces of the Suspension Bridge were dismantled, leaving the Lower Steel Arch Bridge—later renamed the Whirlpool Rapids Bridge—in its stead. On inspection, the cores of the cables that formerly held up the Suspension Bridge were found to be as sound as on the day the bridge was built.

Footnotes

a. Template:Note labelMerritt was not alone in dreaming of a suspension bridge across the Niagara. Engineers Francis Hall, Charles Ellet, Jr., and Charles B. Stuart had individually spoke about such an idea in the years before the Suspension Bridge was started.

b. Template:Note labelThe Horseshoe Falls have receded 3–6 feet (0.9–1.8 metres) per year before the 1950s and are receding at a rate of 1–2 feet (0.3–0.6 metres) per year thereafter. Due to this erosion, it may no longer be visible from the location stated in the article.

c. Template:Note labelStuart and Merritt, at this time, were leading the joint ventures that formed the bridge companies.

d. Template:Note labelAll monetary units in this article are of the United States dollar. According to the Bank of Canada, the US$ is used in Canada up to the 1850s and '60s; moreover, the Canadian dollar—during its inception in the 1860s and '70s—was equal in value to the US$.

e. Template:Note labelThe prize money was stated to be $5 or $10 among various sources. This article follows the McCullough source.

f. Template:Note labelSimilarly, Homan Walsh was either a 10-year-old or 15-year-old boy depending on the source. This article follows the Robinson source.

g. Template:Note labelAlthough Robinson stated the "toll" as $1.25, this article follows the $1.00 fee stated by Crabtree and Tyrell.

h. Template:Note labelA railway bridge with a double-deck design was suggested by civil engineer Squire Whipple during the early planning stage of the project.

i. Template:Note labelSir Samuel Brown's Stockton Railway Bridge in the United Kingdom was the first suspension bridge designed to carry railway traffic, but it could not support the weight of a locomotive. Hence, it was non-operational as a railway bridge. Built in 1829, the bridge was closed in 1830.

j. Template:Note labelA similar design, proposed by engineer John Trautwine, was exhibited 18 months before the construction of the Suspension Bridge. It was not used in any suspension bridges.

k. Template:Note labelThe bridge's span has been given lengths ranging from 800 to 825 ft by various sources. This article takes the length stated by McCullough.

l. Template:Note labelSerrell's Lewiston Suspension Bridge collapsed in 1864, and Keefer's Falls View Suspension Bridge in 1889.

m. Template:Note labelThe difference between "Weight of superstructure" and "Weight of superstructure and maximum loads".

n. Template:Note labelThe Niagara customs house was added to the list of National Register of Historic Places in 1973; thirty-five years later, renovation was started to transform the building into a railway station and history museum for the region.

o. Template:Note labelAs pictured in the advertisement for the Great Western Railway shown in this article.

References

Bibliography

Primary sources

• Template:Cite paper
• Template:Cite paper
• National Park Service (2004). "New York—Niagara County". Washington, D.C., United States: National Register of Historic Places. Retrieved 2008-09-26.
• Template:Cite paper
• Template:Cite paper

Secondary sources

• Baer, Christopher (2005). "PRR Chronology 1855" (PDF). Pennsylvania, United States: Pennsylvania Railroad Technical & Historical Society. Retrieved 2008-07-07.
• Bianculli, Anthony. "Bridges—Suspension bridges". Trains and Technology: The American Railroad in the Nineteenth Century. Vol. 4. Delaware, United States: University of Delaware Press. ISBN 0-874-13803-5. Retrieved 2008-07-15.
• Billington, David. "John Roebling and the Suspension Bridge". The Tower and the Bridge: The New Art of Structural Engineering. New Jersey, United States: Princeton University Press. ISBN 0-691-02393-X. Retrieved 2008-08-15.
• Brightly, Frederick. "New York—Collection Districts". An Analytical Digest of the Laws of the United States. Vol. 2. Philadelphia, United States: Kay & Brother. Retrieved 2008-09-22.
• Carson, Rob (2005-10-16). "Spinning into History". The News Tribune. Washington, United States: Tacoma News. Retrieved 2008-09-17.
• Crabtree, Jerome. "Iron and Steel Working". The Marvels of Modern Mechanism and Their Relations to Social Betterment. Vol. 1. Massachusetts, United States: The King-Richardson Company. Retrieved 2008-09-04.
• Disturnell, John. The Traveler's Guide to the Hudson River, Saratoga Springs, Lake George, Falls of Niagara and Thousand Islands: Also, to the Green and White Mountains, and Other Parts of New England, Forming the Fashionable Northern Tour Through the United States and Canada. New York, United States: American News Co. Retrieved 2008-07-15.
• Dubinsky, Karen. "The People's Niagara at the Turn of the Century". The Second Greatest Disappointment: Honeymooning and Tourism at Niagara Falls. New Jersey, United States: Rutgers University Press. ISBN 1-896-35723-7. Retrieved 2008-09-14.
• Dumych, Daniel. Niagara Falls. New Hampshire, United States: Arcadia Publishing. ISBN 0-738-53736-5. Retrieved 2008-07-27.
• Denise, Gee (2008-09-22). "Underground Railroad expert set to develop museum in Niagara Falls". The Buffalo News. New York, United States: Stanford Lipsey. Retrieved 2008-09-27.
• Gibbon, Donald (1851-01-25). "How Roebling Did It: Building the World's First Wire-Rope Suspension Aqueduct in 1840s Pittsburgh". JOM. Pennsylvania, United States: The Minerals, Metals & Materials Society (TMS). Vol. 58 (No. 5): 20–29. Retrieved 2008-09-15.
• Grant, John. "Suspended by Steel Ropes". Niagara Falls: An Intimate Portrait. Connecticut, United States: Globe Pequot. ISBN 0-762-74025-6. Retrieved 2008-09-17.
• Griggs, Francis (2006). "Great Achievements—Charles Ellet, Jr" (PDF). Structure. Illinois, United States: National Council of Structural Engineers Associations. ISSN 0969-2126. Retrieved 2008-07-14.
• Griggs, Francis (2006). "Great Achievements—John A. Roebling" (PDF). Structure. Illinois, United States: National Council of Structural Engineers Associations. ISSN 0969-2126. Retrieved 2008-07-14.
• Holley, George. "Chapter XVI" (PDF). The Falls of Niagara with Supplementary Chapters on the Other Famous Cataracts of the World. New York, United States: A.C. Armstrong & Son. Retrieved 2008-07-22.
• Irwin, William. "Bridge to a New Niagara". The New Niagara: Tourism, Technology, and the Landscape of Niagara Falls, 1776–1917. Pennsylvania, United States: Penn State University Press. ISBN 0-271-01593-4. Retrieved 2008-07-30.
• Kostoff, Robert. "Suspension Bridge". Remembering Niagara: Tales from Beyond the Falls. South Carolina, United States: The History Press. ISBN 1-596-29451-5. Retrieved 2008-09-17.
• MacKenzie, Mark (2003-08-03). "Let's Go Drive a Kite". The Independent on Sunday. London, United Kingdom: Independent News & Media. Retrieved 2008-07-07.
• McCullough, David (2001) [1972]. The Great Bridge: The Epic Story of the Building of the Brooklyn Bridge (Classic edition ed.). New York, United States: Simon & Schuster. ISBN 0-743-21737-3. Retrieved 2008-07-24.
• Merritt, Jedediah. Biography of the Hon. W. H. Merritt, M. P.: Of Lincoln, District of Niagara, Including an Account of the Origin, Progress and Completion of Some of the Most Important Public Works in Canada. Ontario, Canada: E. S. Leavenworth. Retrieved 2008-07-15.
• Middleton, William. "A Bridge at the Narrowing". The Bridge at Québec. Indiana, United States: Indiana University Press. ISBN 0-253-33761-5. Retrieved 2008-07-18.
• Nye, David (1996-05-02) [1996]. American Technological Sublime (New edition ed.). Massachusetts, United States: MIT Press. ISBN 0-262-64034-1. Retrieved 2008-09-16.
• Pairpoint, Alfred. "The Niagara Suspension-Bridge". Uncle Sam and His Country, or, Sketches of America, in 1854-55-56. London, United Kingdom: Simpkin, Marshall, and Co. Retrieved 2008-07-16.
• Powell, James. "Currency Reforms (1841–71)". A History of the Canadian Dollar (PDF). Ontario, Canada: Bank of Canada. ISBN 0-662-28123-3. Retrieved 2008-08-25.
• Reier, Sharon. "Brooklyn Bridge". The Bridges of New York. New York, United States: Dover Publications. ISBN 0-486-41230-X. Retrieved 2008-07-20.
• Robertson, Joseph (1851-01-25). "Niagara Suspension Bridge". The Mechanics' Magazine, Museum, Register, Journal and Gazette. London, United Kingdom: Robertson and Co. Vol. 54 (No. 1433). Retrieved 2008-09-15.
• Robinson, Meg (2005). "The Kite that Bridged the Niagara". Niagara Falls, United States: Niagara International Kite Festival. Retrieved 2008-07-07.
• Ryerson, Egerton (1854). "The Niagara Suspension Bridge". The Journal of Education for Upper Canada. Toronto, Canada: Lovell and Gibson. Vol. 8 (No. 10). Retrieved 2008-07-17.
• Scott, Richard. In the Wake of Tacoma: Suspension Bridges and the Quest for Aerodynamic Stability. Virginia, United States: American Society of Civil Engineers. ISBN 0-784-40542-5. Retrieved 2008-07-18.
• Skempton, Alec. "Biographical Dictionary". A Biographical Dictionary of Civil Engineers in Great Britain and Ireland: 1500 to 1830. Vol. 1. London, United Kingdom: Thomas Telford. ISBN 0-727-72939-X. Retrieved 2008-09-04.
• Strand, Ginger. "The Other Side of Jordan". Inventing Niagara: Beauty, Power, and Lies. New York, United States: Simon & Schuster. ISBN 1-416-54656-1. Retrieved 2008-08-30.
• Switala, William. "Operation of the Railroad". Underground Railroad in New Jersey and New York. Pennsylvania, United States: Stackpole Books. ISBN 0-811-73258-4. Retrieved 2008-09-15.
• Talman, James (2000). "Merritt, William Hamilton". Canada: Dictionary of Canadian Biography Online. Retrieved 2008-09-17.
• Tesmer, Irving. "Operation of the Railroad". Colossal Cataract: The Geologic History of Niagara Falls. New York, United States: State University of New York Press. ISBN 0-873-95522-6. Retrieved 2008-09-15.
• Trachtenberg, Alan (1979-07-15) [1965]. "An American Dream". Brooklyn Bridge: Fact and Symbol (Second edition ed.). Illinois, United States: University of Chicago Press. ISBN 0-226-81115-8. Retrieved 2008-09-18.
• Troyano, Leonardo Fernández. Bridge Engineering: A Global Perspective. London, United Kingdom: Thomas Telford. ISBN 0-727-73215-3. Retrieved 2008-09-04.
• Tyrrell, Henry. "Suspension Bridges". History of Bridge Engineering. Chicago, United States: Self-published. Retrieved 2008-07-25.
• Wilson, Ken. Everybody's Heard of Blondin. West Swanzey, United Kingdom: Pond View Books. ISBN 1-871-04435-9. Retrieved 2008-09-03.

External links

• Bridges Over Niagara Falls at Niagara Falls Thunder Alley
• Template:Structurae